Planted Seat Brackets – Chevrolet Corvette [C7 Chassis] (2014+) – Driver Side (Left Side) + Passenger Side (Right Side) – Part # SB001DR + SB001PA
The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it’s accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted has created each seat bracket using the floor of the vehicle as a reference, literally bringing each vehicle into their development center so they can create the best fitting, bolt-in, universal seat bracket possible.
WHY PLANTED?
Universal. Strong. Secure
Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, MOMO, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. The Planted bracket will not bend or warp with heat unlike cheap knock-off brackets.
*Bride sliders are generally made to be vehicle specific so need to have the “feet” removed to make them “universal.” Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.
**Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 inch. The Narrow version requires no modification.
QUALITY ASSURANCE
- Each Planted Seat Bracket goes through three levels of quality control to ensure Planted’s high standards are met
-
All Planted Seat Brackets are hand welded in Bellevue, WA, USA
-
Direct fit to most aftermarket seats, but has extra material if modification for direct mounting or non-common bolt pattern is needed
-
Superior quality compared to the competition, BEWARE OF COUNTERFEITS
DISCLAIMERS
- Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
- Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size than the factory seat.
- Replacing a factory seat with an aftermarket seat may cause the vehicle’s warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
- Installation of an aftermarket seat that disables factory safety features (side airbag, etc) may not be legal and it is up to the end user to check with their local laws regarding the installation of aftermarket components.
- Professional installation is recommended.
Color / Finish: Black Powder Coated Steel
Quantity: 2 Seat Brackets (1 Driver Side / Left Side and 1 Passenger Side / Right Side) – enough 2 seats
Vehicle Placement: Driver Side (Left Side) + Passenger Side (Right Side)
Manufacturer: Planted Technology
Find yours today via our eBay store