Shield Auto Parts – 12mm Spacer for MOMO, NRG, Sparco, and OMP Steering Wheels + Snap Off and NRG Short/Thin Quick Releases
The Shield Auto Parts Spacer is made of 6061-T6 Aluminum in a Black Textured Powder Coating and is 12mm (0.47 inches) tall.
To those of you who have wanted to install an NRG Short Quick Release on an NRG Short Hub Adapter, only to find out that the quick release bottoms out on the column nut or that the NRG Spacer is too wide to fit the short quick release, here is your answer. The Shield Auto Parts Spacer is is short enough to not cause the steering wheel to be pushed too close but tall enough to clear the base on the on the NRG Short Quick Releases (please note for vehicles that have a longer column that protrudes past the NRG short hub adapter, an additional spacer may be required).
Includes (6) 25mm Countersunk Screws for use on most steering wheels and Snap Off Quick Releases.
Includes (6) 30mm Socket Cap Screws for use with NRG Short Quick Releases
Please Note: NRG Standard Quick Releases/Steering Wheels (if using trim ring) use Button Head Screws (sold separately).
The inner diameter of the spacer is large enough to use a MOMO Retainer Ring where needed. For NRG Steering Wheels, 30mm button head screws (for NRG) would be required for this spacer (available separately) unless using the NRG Steering Wheel without their trim ring.
For use with 6 hole Quick Releases, Steering Wheels, and Hub Adapters that use a 70mm bolt pattern. Will NOT fit Nardi, Personal, or Dino that use the 74mm bolt pattern
Find yours today via our eBay store