Author Archives: ShieldAutoParts
Planted PRP Seat Belt / Harness Reinforcement Plate
Planted Universal Seat Belt / Harness Reinforcement Plate – Black Powder Coated Steel – Part # PRP
The Planted Reinforcement Plate is used to reinforce a bolt or eye-bolt mounting point and is recommended when installing a harness in a non-factory location. Reinforcing a harness mount point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. The Planted Reinforcement Plate uses a 7/16″ – 20 nut welded to a 1/8th Inch thick piece of steel measuring 2 inches x 3 inches and then powder coated black.
The Planted Reinforcement Plate weighs about 1/3 lbs and is sold individually. Bolts or eye-bolts are not included.
Color / Finish: Black Powder Coated Steel
Quantity: 1
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store
Shield Auto Parts Steering Wheel / Quick Release Spacer for NRG Short Quick Release
Shield Auto Parts – 12mm Spacer for MOMO, NRG, Sparco, and OMP Steering Wheels + Snap Off and NRG Short/Thin Quick Releases
The Shield Auto Parts Spacer is made of 6061-T6 Aluminum in a Black Textured Powder Coating and is 12mm (0.47 inches) tall.
To those of you who have wanted to install an NRG Short Quick Release on an NRG Short Hub Adapter, only to find out that the quick release bottoms out on the column nut or that the NRG Spacer is too wide to fit the short quick release, here is your answer. The Shield Auto Parts Spacer is is short enough to not cause the steering wheel to be pushed too close but tall enough to clear the base on the on the NRG Short Quick Releases (please note for vehicles that have a longer column that protrudes past the NRG short hub adapter, an additional spacer may be required).
Includes (6) 25mm Countersunk Screws for use on most steering wheels and Snap Off Quick Releases.
Includes (6) 30mm Socket Cap Screws for use with NRG Short Quick Releases
Please Note: NRG Standard Quick Releases/Steering Wheels (if using trim ring) use Button Head Screws (sold separately).
The inner diameter of the spacer is large enough to use a MOMO Retainer Ring where needed. For NRG Steering Wheels, 30mm button head screws (for NRG) would be required for this spacer (available separately) unless using the NRG Steering Wheel without their trim ring.
For use with 6 hole Quick Releases, Steering Wheels, and Hub Adapters that use a 70mm bolt pattern. Will NOT fit Nardi, Personal, or Dino that use the 74mm bolt pattern
Find yours today via our eBay store
Product Showcase: Shield Auto Parts Steering Wheel / Quick Release Spacer for NRG Short Quick Release
Planted Seat Brackets Coming Soon
Shield Auto Parts has added Planted Technology as an offered product line and will be providing Planted Seat Brackets, Hardware, and Accessories. Stay tuned for updates to our website and product information.
Shield Auto Parts M8x1.25 Shift Knob Adapter Install on a 2015 Toyota Corolla
Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M9x1.25 Thread Pitch
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M9x1.25 Thread Pitch – Part # U15.25-M9X125
Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.
Fits*:
Thrustmaster TH8A Simulation Shifter
Thrustmaster TH8 RS Simulation Shifter
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Thrustmaster TH8A Simulation Shifter
Thrustmaster TH8 RS Simulation Shifter
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Find yours today via our eBay store
Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – 5/16 – 18 Thread Pitch
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – 5/16 – 18 Thread Pitch – Part # U15.25-51618
Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.
Fits*:
Austin-Healey Sprite
Chevrolet Camaro (1967 – 1968)
Chevrolet Corvette [C2 Chassis] (1963 – 1967)
Chevrolet Impala Sport Coupe [4 Speed Transmission] (1959)
Jaguar [Most Models with Manual Transmission] (until 1964)
MG Midget & 1100 Sedan
Mini Cooper [Older Style]
Morgan [Various Models]
Oldsmobile 442 (1969)
Pontiac Firebird [Manual Transmission] (until 1967)
Triumph GT6
Triumph Spitfire
Triumph TR3B
Triumph TR6
Triumph TR7
Gennie Aftermarket Shifters – Various Automatic Models
Lenco Aftermarket Shifters – Various Models
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Austin-Healey Sprite
Chevrolet Camaro (1967 – 1968)
Chevrolet Corvette [C2 Chassis] (1963 – 1967)
Chevrolet Impala Sport Coupe [4 Speed Transmission] (1959)
Jaguar [Most Models with Manual Transmission] (until 1964)
MG Midget & 1100 Sedan
Mini Cooper [Older Style]
Morgan [Various Models]
Oldsmobile 442 (1969)
Pontiac Firebird [Manual Transmission] (until 1967)
Triumph GT6
Triumph Spitfire
Triumph TR3B
Triumph TR6
Triumph TR7
Gennie Aftermarket Shifters – Various Automatic Models
Lenco Aftermarket Shifters – Various Models
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Find yours today via our eBay store
Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – 1/2 – 13 Thread Pitch
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – 1/2 – 13 Thread Pitch – Part # U15.25-1213
Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.
Fits*:
B&M Quick Click Shifter
Hurst Pro-Matic Shifter (until 1987) [Automatic Transmission]
Hurst Vertical Gate Shifter (until 1987) [Automatic Transmission]
Hurst V-Matic (until 1987) [Automatic Transmission]
Serco [Various Models]
Winters Sidewinder Shifter (Standard)
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
B&M Quick Click Shifter
Hurst Pro-Matic Shifter (until 1987) [Automatic Transmission]
Hurst Vertical Gate Shifter (until 1987) [Automatic Transmission]
Hurst V-Matic (until 1987) [Automatic Transmission]
Serco [Various Models]
Winters Sidewinder Shifter (Standard)
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Find yours today via our eBay store
Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – 1/2 – 20 Thread Pitch
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – 1/2 – 20 Thread Pitch – Part # U15.25-1220
Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.
Fits*:
Dodge Viper [Manual Transmission]
Ford Fairlane
Ford Falcon
Ford Mustang (1964 – 1969) [Manual Transmission]
Sunbeam Tiger
B&M Aftermarket Shifter – All models except Quick Click
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Dodge Viper [Manual Transmission]
Ford Fairlane
Ford Falcon
Ford Mustang (1964 – 1969) [Manual Transmission]
Sunbeam Tiger
B&M Aftermarket Shifter – All models except Quick Click
*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels
Find yours today via our eBay store