Category Archives: Planted Seat Brackets
Planted SB001PA for Chevrolet Corvette C7
Planted Seat Bracket – Chevrolet Corvette [C7 Chassis] (2014+) – Passenger Side (Right Side) – Part # SB001PA
The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it’s accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted has created each seat bracket using the floor of the vehicle as a reference, literally bringing each vehicle into their development center so they can create the best fitting, bolt-in, universal seat bracket possible.
WHY PLANTED?
Universal. Strong. Secure
Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, MOMO, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. The Planted bracket will not bend or warp with heat unlike cheap knock-off brackets.
*Bride sliders are generally made to be vehicle specific so need to have the “feet” removed to make them “universal.” Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.
**Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 inch. The Narrow version requires no modification.
QUALITY ASSURANCE
- Each Planted Seat Bracket goes through three levels of quality control to ensure Planted’s high standards are met
-
All Planted Seat Brackets are hand welded in Bellevue, WA, USA
-
Direct fit to most aftermarket seats, but has extra material if modification for direct mounting or non-common bolt pattern is needed
-
Superior quality compared to the competition, BEWARE OF COUNTERFEITS
DISCLAIMERS
- Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
- Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size than the factory seat.
- Replacing a factory seat with an aftermarket seat may cause the vehicle’s warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
- Installation of an aftermarket seat that disables factory safety features (side airbag, etc) may not be legal and it is up to the end user to check with their local laws regarding the installation of aftermarket components.
- Professional installation is recommended.
Color / Finish: Black Powder Coated Steel
Quantity: 1 Passenger Side (Right Side) Bracket (enough for 1 seat)
Vehicle Placement: Passenger Side (Right Side)
Manufacturer: Planted Technology
Find yours today via our eBay store or web store
Product Showcase: Planted SB001DR for Chevrolet Corvette C6 & C7
Planted SB001DR for Chevrolet Corvette C7
Planted Seat Bracket – Chevrolet Corvette [C7 Chassis] (2014+) – Driver Side (Left Side) – Part # SB001DR
The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it’s accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted has created each seat bracket using the floor of the vehicle as a reference, literally bringing each vehicle into their development center so they can create the best fitting, bolt-in, universal seat bracket possible.
WHY PLANTED?
Universal. Strong. Secure
Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, MOMO, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. The Planted bracket will not bend or warp with heat unlike cheap knock-off brackets.
*Bride sliders are generally made to be vehicle specific so need to have the “feet” removed to make them “universal.” Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.
**Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 inch. The Narrow version requires no modification.
QUALITY ASSURANCE
- Each Planted Seat Bracket goes through three levels of quality control to ensure Planted’s high standards are met
-
All Planted Seat Brackets are hand welded in Bellevue, WA, USA
-
Direct fit to most aftermarket seats, but has extra material if modification for direct mounting or non-common bolt pattern is needed
-
Superior quality compared to the competition, BEWARE OF COUNTERFEITS
DISCLAIMERS
- Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
- Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size than the factory seat.
- Replacing a factory seat with an aftermarket seat may cause the vehicle’s warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
- Installation of an aftermarket seat that disables factory safety features (side airbag, etc) may not be legal and it is up to the end user to check with their local laws regarding the installation of aftermarket components.
- Professional installation is recommended.
Color / Finish: Black Powder Coated Steel
Quantity: 1 Driver Side (Left Side) Bracket (enough for 1 seat)
Vehicle Placement: Driver Side (Left Side)
Manufacturer: Planted Technology
Find yours today via our eBay store or web store
Planted SB001DR for Chevrolet Corvette C6
Planted Seat Bracket – Chevrolet Corvette [C6 Chassis, Excludes ZR1] (2005-2013) – Driver Side (Left Side) – Part # SB001DR
The Planted Seat Bracket is a vehicle specific bracket used as an adapter between the floor of the vehicle and an aftermarket seat and it’s accessories. Because the floor of each vehicle varies and typically is not flat, a vehicle specific Seat Bracket is required for installing an aftermarket seat. Planted has created each seat bracket using the floor of the vehicle as a reference, literally bringing each vehicle into their development center so they can create the best fitting, bolt-in, universal seat bracket possible.
WHY PLANTED?
Universal. Strong. Secure
Planted Seat Brackets are laser cut from 3/16 inch thick steel and hand welded to ensure weld penetration for superior strength. Each bracket is pre-slotted with hole patterns to accept sliders from most major seat manufacturers like Braum, Bride*, Cipher Auto, Cobra**, Corbeau, MOMO, NRG, OMP, Racetech, Recaro, Sabelt, Sparco, Status Racing, Takata and more. There is extra space on the bracket for drilling your own hole pattern if using a slider with a less common hole pattern, or direct mounting a seat or side mount when eliminating sliders is preferred. They are finished with a black powder coat. The Planted bracket will not bend or warp with heat unlike cheap knock-off brackets.
*Bride sliders are generally made to be vehicle specific so need to have the “feet” removed to make them “universal.” Bride sliders typically require drilling a new hole pattern into the Planted Seat Bracket because they come in many different widths.
**Cobra sliders come in Narrow and Wide versions. The Wide version will require elongating one hole on each slider by 1/8 inch. The Narrow version requires no modification.
QUALITY ASSURANCE
- Each Planted Seat Bracket goes through three levels of quality control to ensure Planted’s high standards are met
-
All Planted Seat Brackets are hand welded in Bellevue, WA, USA
-
Direct fit to most aftermarket seats, but has extra material if modification for direct mounting or non-common bolt pattern is needed
-
Superior quality compared to the competition, BEWARE OF COUNTERFEITS
DISCLAIMERS
- Seats come in many different shapes and sizes so not all seats will fit in all vehicles. It is up to the end user to determine if the seat will fit prior to ordering the Seat Bracket and other components.
- Many vehicles have the steering wheel offset toward the center of the vehicle. This can be accentuated when installing an aftermarket seat of a different size than the factory seat.
- Replacing a factory seat with an aftermarket seat may cause the vehicle’s warning indicators to activate. This can be due to airbag, weight and/or other sensors in the factory seat that are not included in an aftermarket seat. It may be possible to eliminate these indicators with an electronic resistor but it is up to the end user to determine if a resistor will work & which resistor to use.
- Installation of an aftermarket seat that disables factory safety features (side airbag, etc) may not be legal and it is up to the end user to check with their local laws regarding the installation of aftermarket components.
- Professional installation is recommended.
Color / Finish: Black Powder Coated Steel
Quantity: 1 Driver Side (Left Side) Bracket (enough for 1 seat)
Vehicle Placement: Driver Side (Left Side)
Manufacturer: Planted Technology
Find yours today via our eBay store or web store
Product Showcase: Planted PSOSSM-B Steel Offset Side Mount
Planted PSOSSM-B Steel Offset Side Mount
Planted Offset Universal Seat Side Mount – Black Powder Coated Steel – Part # PSOSSM-B
The Planted Side Mount is an “L” shaped bracket sold in pairs (1 left and 1 right) used to install side mount seats. Side mount seats have the mounting holes on the side of the seat rather than the bottom, so a Side Mount or similar product is required for installation.
The Planted Steel Offset Universal Side Mount is made from 1/8th inch thick steel which complies with FIA’s required thickness, weighs approximately 6.5 lbs, and is powder coated black. These will fit Side Mount Seats offered by most seat manufacturers and have been tested on Bride, Corbeau, Cobra, MOMO, NRG, OMP, Ractech, Recaro, Sabelt, Sparco, Status Racing & Takata. The wider slots allow the Side Mounts to be compatible with most other seat manufacturers as well but not all seat manufacturers have been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders).
90 DEGREE VS OFFSET SIDE MOUNTS
- Planted offers two types of Side Mounts; 90 Degree and Offset. Both types are offered in Aluminum or Steel.
- 90 Degree Side Mounts are the most common type and should be used when the width of the sliders are narrower than the width of the seat so the sliders sit under the seat.
- Offset Side Mounts are less common and should be used when the width of the sliders are equal to or wider than the width of the seat.
- Either 90 Degree or Offset Side Mounts can be used when direct mounting without sliders; however, the 90 Degree Side Mounts are recommended because the overall assembly will be narrower allowing more side to side adjustability.
DISCLAIMERS
- Sold as a pair (1 left and 1 right), enough for one seat.
- Hardware is sold separately.
Color / Finish: Black Powder Coated Steel
Quantity: 1 Pair (enough for 1 seat)
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store
Product Showcase: Planted PAOSSM-G Aluminum Offset Side Mount
Planted PAOSSM-G Aluminum Offset Side Mount
Planted Offset Universal Seat Side Mount – Grey Powder Coated Aluminum – Part # PAOSSM-G
The Planted Side Mount is an “L” shaped bracket sold in pairs (1 left and 1 right) used to install side mount seats. Side mount seats have the mounting holes on the side of the seat rather than the bottom, so a Side Mount or similar product is required for installation.
The Planted Aluminum Offset Universal Side Mount is made from 1/4th inch thick aluminum which complies with FIA’s required thickness, weighs approximately 3.5 lbs, and is powder coated grey. These will fit Side Mount Seats offered by most seat manufacturers and have been tested on Bride, Corbeau, Cobra, Momo, NRG, OMP, Ractech, Recaro, Sabelt, Sparco, Status Racing & Takata. The wider slots allow the Side Mounts to be compatible with most other seat manufacturers as well but not all seat manufacturers have been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders).
90 DEGREE VS OFFSET SIDE MOUNTS
- Planted offers two types of Side Mounts; 90 Degree and Offset. Both types are offered in Aluminum or Steel.
- 90 Degree Side Mounts are the most common type and should be used when the width of the sliders are narrower than the width of the seat so the sliders sit under the seat.
- Offset Side Mounts are less common and should be used when the width of the sliders are equal to or wider than the width of the seat.
- Either 90 Degree or Offset Side Mounts can be used when direct mounting without sliders; however, the 90 Degree Side Mounts are recommended because the overall assembly will be narrower allowing more side to side adjustability.
DISCLAIMERS
- Sold as a pair (1 left and 1 right), enough for one seat.
- Hardware is sold separately.
Color / Finish: Grey Powder Coated Aluminum
Quantity: 1 Pair (enough for 1 seat)
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store
Planted Technology available from Shield Auto Parts
Shield Auto Parts is proud to add Planted Technology products to our product line. As part of our commitment to provide quality parts, Planted Seat Brackets are the most versatile and strongest of the brackets out there, made of 3/16th inch thick steel. Planted Brackets are made from the actual car. No more getting something that’s “close” and making it work, now you can get one specific to your vehicle that installs right the first time.