Planted PS90SM-B 90 Degree Universal Seat Side Mount – Black Powder Coated Steel
Planted 90 Degree Universal Seat Side Mount – Black Powder Coated Steel – Part # PS90SM-B
The Planted 90 Degree Side Mount is an “L” shaped bracket sold in pairs (1 left and 1 right) used to install side mount seats. Side mount seats have the mounting holes on the side of the seat rather than the bottom, so a Side Mount or similar product is required for installation.
The Planted 90 Degree Steel Universal Side Mount is made from 1/8th inch thick steel which complies with FIA’s required thickness, weighs approximately 5.5 lbs, and is powder coated black. These will fit Side Mount Seats offered by most seat manufacturers and have been tested on Bride, Corbeau, Cobra, Momo, NRG, OMP, Ractech, Recaro, Sabelt, Sparco, Status Racing & Takata. The wider slots allow the Side Mounts to be compatible with most other seat manufacturers as well but not all seat manufacturers have been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders).
90 DEGREE VS OFFSET SIDE MOUNTS
- Planted offers two types of Side Mounts; 90 Degree and Offset. Both types are offered in Aluminum or Steel.
- 90 Degree Side Mounts are the most common type and should be used when the width of the sliders are narrower than the width of the seat so the sliders sit under the seat.
- Offset Side Mounts are less common and should be used when the width of the sliders are equal to or wider than the width of the seat.
- Either 90 Degree or Offset Side Mounts can be used when direct mounting without sliders; however, the 90 Degree Side Mounts are recommended because the overall assembly will be narrower allowing more side to side adjustability.
DISCLAIMERS
- Sold as a pair (1 left and 1 right), enough for one seat.
- Hardware is sold separately.
Color / Finish: Black Powder Coated Steel
Quantity: 1 Pair (enough for 1 seat)
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store
Product Showcase: Planted SHK Seat Hardware Kit
Planted SHK Seat Hardware Kit
Planted Seat Hardware Kit – 8 Screws, 8 Nuts, and 8 Washers – Part # SHK
The Planted Seat Hardware Kit includes 8 each of button head cap screws in 8mm x 1.25 thread pitch & 20mm in length, washers & nyloc nuts. This hardware kit will allow you to mount an aftermarket seat in the following configurations:
Bottom Mount Seat:
1. Seat to sliders and sliders to Planted Seat Bracket.
2. Seat direct mounted to Planted Seat Bracket.*
Side Mount Seat:**
1. Planted Side Mounts to sliders and sliders to Planted Seat Bracket.
2. Planted Side Mounts direct mounted to Planted Seat Bracket.*
*Direct mounting without sliders will require some drilling.
**Most side mount seats do not include hardware to attach the side mounts so a Planted Side Mount Hardware Kit (SMHK) may be needed as well.
Color / Finish: Black Screws – Silver Washers – Silver Nuts
Quantity: 8 Button Head Screws, 8 Washers, and 8 Nuts (enough for 1 seat)
Vehicle Placement: Universal (For use with Side Mount Brackets/Adapters)
Manufacturer: Planted Technology
Find yours today via our eBay store
Product Showcase: Planted SMHK Side Mount Hardware Kit
Planted SMHK Side Mount Hardware Kit
Planted Side Mount Hardware Kit – 4 Button Head Screws + 4 Washers – Part # SMHK
Planted Side Mount Hardware Kit includes 4 button head cap screws in 8mm x 1.25 thread pitch & 25mm in length, and 4 fender washers. This kit will allow you to attach Side Mounts to your aftermarket Side Mount Seat.
Color / Finish: Black Screws – Silver Washers
Quantity: 4 Button Head Screws + 4 Washers
Vehicle Placement: Universal (For use with Side Mount Brackets/Adapters)
Manufacturer: Planted Technology
Find yours today via our eBay store
Product Showcase: Planted PA90SM-G 90 Degree Aluminum Side Mounts
Planted PA90SM-G 90 Degree Side Mount – Grey Aluminum
Planted 90 Degree Universal Seat Side Mount – Grey Aluminum – Part # PA90SM-G
The Planted 90 Degree Side Mount is an “L” shaped bracket sold in pairs (1 left and 1 right) used to install side mount seats. Side mount seats have the mounting holes on the side of the seat rather than the bottom, so a Side Mount or similar product is required for installation.
The Planted 90 Degree Aluminum Universal Side Mount is made from 1/4th inch thick aluminum which complies with FIA’s required thickness, weighs approximately 3 lbs, and is powder coated grey. These will fit Side Mount Seats offered by most seat manufacturers and have been tested on Bride, Corbeau, Cobra, Momo, NRG, OMP, Ractech, Recaro, Sabelt, Sparco, Status Racing & Takata. The wider slots allow the Side Mounts to be compatible with most other seat manufacturers as well but not all seat manufacturers have been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders).
90 DEGREE VS OFFSET SIDE MOUNTS
- Planted offers two types of Side Mounts; 90 Degree and Offset. Both types are offered in Aluminum or Steel.
- 90 Degree Side Mounts are the most common type and should be used when the width of the sliders are narrower than the width of the seat so the sliders sit under the seat.
- Offset Side Mounts are less common and should be used when the width of the sliders are equal to or wider than the width of the seat.
- Either 90 Degree or Offset Side Mounts can be used when direct mounting without sliders; however, the 90 Degree Side Mounts are recommended because the overall assembly will be narrower allowing more side to side adjustability.
DISCLAIMERS
- Sold as a pair (1 left and 1 right), enough for one seat.
- Hardware is sold separately.
Color / Finish: Grey Powder Coated Aluminum
Quantity: 1 Pair (enough for 1 seat)
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store
Product Showcase: Planted PSP.25 Seat Spacers
Planted PSP.25 Seat Spacer – 1/4 inch Thick Black Powder Coated Aluminum
Planted Seat Spacer – 1/4 inch Thick – Black Powder Coated Aluminum – Part # PSP.25
This Planted Seat Spacer is 1/4 inch thick aluminum powder coated black, and is the length and width of the Recaro Non-tabbed slider. The spacer weighs about 1 lbs total and includes pre-drilled slots so putting them between the slider and the seat bracket is a sinch with some longer hardware. Planted created these spacers to solve an issue with the Recaro Sportster CS, Style, Sport, and Trend seats where the bottom of the seat hangs down lower than the sliders making contact with the bracket. Raising them 1/4 inch solves the issue.
The spacers are also ideal for raising any seat that sits lower then desired and can be used with other major brands of sliders like Sparco & OMP. They can also be used without sliders although in some cases drilling additional holes may be required.
The seat spacer is sold in a pair (enough for one seat).
Measurements:
Length = 15-1/2 inches
Width = 1-1/2 inches
Hole Spacing = 12-1/4 inches to 13-11/16 inches (both holes are slotted)
Color / Finish: Black Powder Coated Aluminum
Quantity: 1 Pair (enough for 1 seat)
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store