Tag Archives: Black
Planted PSOSSM-B Steel Offset Side Mount
Planted Offset Universal Seat Side Mount – Black Powder Coated Steel – Part # PSOSSM-B
The Planted Side Mount is an “L” shaped bracket sold in pairs (1 left and 1 right) used to install side mount seats. Side mount seats have the mounting holes on the side of the seat rather than the bottom, so a Side Mount or similar product is required for installation.
The Planted Steel Offset Universal Side Mount is made from 1/8th inch thick steel which complies with FIA’s required thickness, weighs approximately 6.5 lbs, and is powder coated black. These will fit Side Mount Seats offered by most seat manufacturers and have been tested on Bride, Corbeau, Cobra, MOMO, NRG, OMP, Ractech, Recaro, Sabelt, Sparco, Status Racing & Takata. The wider slots allow the Side Mounts to be compatible with most other seat manufacturers as well but not all seat manufacturers have been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders).
90 DEGREE VS OFFSET SIDE MOUNTS
- Planted offers two types of Side Mounts; 90 Degree and Offset. Both types are offered in Aluminum or Steel.
- 90 Degree Side Mounts are the most common type and should be used when the width of the sliders are narrower than the width of the seat so the sliders sit under the seat.
- Offset Side Mounts are less common and should be used when the width of the sliders are equal to or wider than the width of the seat.
- Either 90 Degree or Offset Side Mounts can be used when direct mounting without sliders; however, the 90 Degree Side Mounts are recommended because the overall assembly will be narrower allowing more side to side adjustability.
DISCLAIMERS
- Sold as a pair (1 left and 1 right), enough for one seat.
- Hardware is sold separately.
Color / Finish: Black Powder Coated Steel
Quantity: 1 Pair (enough for 1 seat)
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store
Planted PRP Seat Belt / Harness Reinforcement Plate
Planted Universal Seat Belt / Harness Reinforcement Plate – Black Powder Coated Steel – Part # PRP
The Planted Reinforcement Plate is used to reinforce a bolt or eye-bolt mounting point and is recommended when installing a harness in a non-factory location. Reinforcing a harness mount point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. The Planted Reinforcement Plate uses a 7/16″ – 20 nut welded to a 1/8th Inch thick piece of steel measuring 2 inches x 3 inches and then powder coated black.
The Planted Reinforcement Plate weighs about 1/3 lbs and is sold individually. Bolts or eye-bolts are not included.
Color / Finish: Black Powder Coated Steel
Quantity: 1
Vehicle Placement: Universal (Fits either side)
Manufacturer: Planted Technology
Find yours today via our eBay store