Shield Auto Parts

Tag Archives: Gear Knob Install Kit

Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M9x1.25 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M9x1.25
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M9x1.25 Thread Pitch – Part # U15.25-M9X125


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Thrustmaster TH8A Simulation Shifter
Thrustmaster TH8 RS Simulation Shifter

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – 5/16 – 18 Thread Pitch

Posted on by Posted in Shift Knob Adapter - 5/16 - 18
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – 5/16 – 18 Thread Pitch – Part # U15.25-51618


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Austin-Healey Sprite
Chevrolet Camaro (1967 – 1968)
Chevrolet Corvette [C2 Chassis] (1963 – 1967)
Chevrolet Impala Sport Coupe [4 Speed Transmission] (1959)
Jaguar [Most Models with Manual Transmission] (until 1964)
MG Midget & 1100 Sedan
Mini Cooper [Older Style]
Morgan [Various Models]
Oldsmobile 442 (1969)
Pontiac Firebird [Manual Transmission] (until 1967)
Triumph GT6
Triumph Spitfire
Triumph TR3B
Triumph TR6
Triumph TR7
Gennie Aftermarket Shifters – Various Automatic Models
Lenco Aftermarket Shifters – Various Models

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – 1/2 – 13 Thread Pitch

Posted on by Posted in Shift Knob Adapter - 1/2 - 13
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – 1/2 – 13 Thread Pitch – Part # U15.25-1213


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
B&M Quick Click Shifter
Hurst Pro-Matic Shifter (until 1987) [Automatic Transmission]
Hurst Vertical Gate Shifter (until 1987) [Automatic Transmission]
Hurst V-Matic (until 1987) [Automatic Transmission]
Serco [Various Models]
Winters Sidewinder Shifter (Standard)

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – 1/2 – 20 Thread Pitch

Posted on by Posted in Shift Knob Adapter - 1/2 - 20
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – 1/2 – 20 Thread Pitch – Part # U15.25-1220


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Dodge Viper [Manual Transmission]
Ford Fairlane
Ford Falcon
Ford Mustang (1964 – 1969) [Manual Transmission]
Sunbeam Tiger
B&M Aftermarket Shifter – All models except Quick Click

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M12x1.75 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M12x1.75
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M12x1.75 Thread Pitch – Part # U15.25-M12X175


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
LSR Performance Aftermarket Tri-Ax Short Throw Shifter
MGW Aftermarket Camaro Retro Shaft Handle Shifter
MGW Aftermarket Camaro Short Throw Shifter (1993 – 2002)
MGW Aftermarket Mustang GT500 Shifter
MGW Aftermarket Mustang Short Throw Shifter
Pro Aftermarket 5.0 Shifter
Shelby American Aftermarket Generation 1 Shifter (until 2011)
Steeda Aftermarket Mustang Short Throw Shifter (2005 – 2010)

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M12x1.25 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M12x1.25
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M12x1.25 Thread Pitch – Part # U15.25-M12X125


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Scion [Most Models with Manual Transmission]
Scion tC [Manual Transmission]
Scion xA [Manual Transmission]
Scion xB [Manual Transmission]
Subaru [Most Models with Manual Transmission]
Suzuki Samurai [Manual Transmission]
Toyota Camry [Manual Transmission]
Toyota Celica [Manual Transmission]
Toyota Corolla [Manual Transmission]
Toyota [Most Models with Manual Transmission]
Toyota MR2 (1991 – 1995) [Manual Transmission]
Toyota Supra [Manual Transmission]
Toyota Tacoma [Manual Transmission]
Toyota Tercel [Manual Transmission]
Toyota Tundra [Manual Transmission]
Barton Aftermarket Camaro Shifter (2013+)
Barton Aftermarket Challenger Shifter
Barton Aftermarket Mustang Shifter 2011BM-1
MGW Aftermarket Mustang GT500 Shifter
MGW Aftermarket Mustang Short Throw Shifter
Roush Aftermarket Mustang Short Throw
Shelby American Generation 2 Aftermarket Shifter (2011+)
Steeda Aftermarket Mustang Short Throw Shifter (2011+)

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M12x1.50 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M12x1.50
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M12x1.50 Thread Pitch – Part # U15.25-M12X150


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Audi [Most Models]
BMW X5 (2004 +) [Automatic Transmission]
Lotus Elise (February 2009 +)
Lotus Exige (February 2009 +)
Volkswagen Beetle (1969 – 1979)
Volkswagen Bus (1968 – 1979) [Manual Transmission]
Volkswagen Karmann Ghia (1969 – 1974)
Volkswagen Golf
Volkswagen Jetta
Volkswagen [Most Models] (1980 +)
Volkswagen Rabbit
Volkswagen Thing (1973 – 1974) [Manual Transmission]
Volkswagen Type 3 (1962 – 1974) [Manual Transmission]
Volkswagen Vanagon (until 1985)
Fanatec Aftermarket/Simulation ClubSport Shifters

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M7x1.00 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M7x1.00
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M7x1.00 Thread Pitch – Part # U15.25-M7X100


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Volkswagen Beetle (1962 – 1967)
Volkswagen Karmann Ghia (1962 – 1967)

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M6x1.00 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M6x1.00
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M6x1.00 Thread Pitch – Part # U15.25-M6X100


Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Toyota Prius Gen 2
Toyota Prius Gen 3
Toyota Prius v
Toyota RAV4 EV

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store


Shield Auto Parts Universal Gear Shift Shifter Knob Installation Adapter – M8x1.25 Thread Pitch

Posted on by Posted in Shift Knob Adapter - M8x1.25
Shield Auto Parts Universal Gear Shift (Shifter) Knob Installation Adapter – M8x1.25 Thread Pitch – Part # U15.25-M8X125



Made in the USA by Shield Auto Parts
Made in the USA by Shield Auto Parts


Designed for use with most aftermarket shift knobs that utilize 3 equidistant set screws around the knob for installation, like MOMO and Nardi. This Shift Knob Installation Adapter easily inserts into the shift knob, allowing you to tighten the set screws to the adapter rather than to your factory shifter column, preventing damages to your shifter threads. Then you can simply screw on your new shift knob. No more using plastic/rubber bushings or adapters that come loose over time. This shift knob installation adapter is made of 6061 Aluminum and designed to last. Changing Shift Knobs? No problem, the Shift Knob installation adapter is designed to fit shift knobs that have a 15mm to 16mm opening, so if you get tired of your existing shift knob, you can easily change it into your new one.


Fits*:
Acura [Most Models with Automatic Transmission]
Chrysler 300 [Automatic Transmission]
Chrysler [Most Models with Manual Transmission]
Datsun 240Z [Manual Transmission]
Datsun 260Z [Manual Transmission]
Datsun 280Z [Manual Transmission]
De Tomaso Pantera [Manual Transmission]
Dodge Challenger [Newer Models with Manual Transmission]
Dodge Charger (until 2007) [Automatic Transmission]
Dodge Charger [Newer Models with Manual Transmission]
Dodge Magnum (until 2007) [Automatic Transmission]
Dodge Magnum [Manual Transmission]
Ford Pantera [Manual Transmission]
Jaguar [Most Models with Manual Transmission]
Lexus [Most Models with Automatic Transmission]
Mazda [Most Models with Automatic Transmission]
Scion tC (2008) [Automatic Transmission]
Scion xB (2008) [Automatic Transmission]
Toyota 4Runner [Automatic Transmission]
Toyota Avalon [Automatic Transmission]
Toyota Corolla [Automatic Transmission]
Toyota [Most Models with Automatic Transmission]

*Note: This list is for reference only, please verify thread pitch on your specific model as some manufacturers change shift knob thread pitches in certain models/trim levels


Find yours today via our eBay store